Description
Tumblers are a dream to piece, and cutting them with your Studio Bullseye™ dies is a breeze too! Enjoy four different sizes in the set, all designed with dog-eared corners for easy alignment while sewing. Team them up with the Bullseye Tumblers-Even Set (AQ50367) for more variety!DescriptionDie Specifications:Compatible Fabric Cutter: Studio Fabric Cutter (AQ50800)Recommended Studio Cutting Plastics: Jumbo (10″ x 12″) (AQ60002) and Mini, Small, Large (5″ x 6″) (AQ60000)Tumbler sizes included in set: 1″, 3″, 5″, 7″Coordinates with: Bullseye Tumblers-Even-2″, 4″, 6″, 8″ for Studio (AQ50367)How to Cut Tumblers:Select tumbler size.Take the blade board that corresponds with the tumbler size you wish to cut.Place the blade board in your Studio™ die tray, FOAM SIDE UP. For most accurate cuts, arrange the tumbler dies in the corner of the cutting tray, at a slight angle with the die touching two sides of the tray.Take the inner foam boards and fill in the center of the blade board.Take the foam board that is one size larger than your blade board and place it as the outer ring.Apply fusible web if desired. Layer or fanfold your fabric. You can cut up to 10 layers of 100% cotton fabric at a time.TIPS: Fusible web counts as one half layer of fabric. Remember to position the fabric on the lengthwise grain, with the selvage edge towards the Studio handle, as it goes under the roller.Place your Studio Cutting Plastic on top.Roll through the Studio Fabric Cutter.Die Tips:For most accurate cuts, arrange the dies in the corner of the cutting tray.With some fabrics, after cutting, a thread or two will remain where die blades meet. Snip threads with scissors.For best results, cut with die blades running under roller at an angle. Do not cut with blades parallel to roller.Blades on some dies are positioned at an angle. Align fabric to edge of shape, not edge of die board.For fast applique, apply fusible web to fabrics, then cut shapes with dies.Use good quality fabric to reduce fabric stretch.It’s always a good idea to test cut one shape before cutting many shapes to ensure fabric orientation is correct.$285.00
