-
Suitable for HUSKYLOCK™ S25 and S21 and AMBER™ AIR s|600 Overlockers The Flat Trim Foot makes it easy to add lace and trims to the top of the fabric with a coverstitch to create beautiful decorative edges and effects. How to use: Set the machine for Coverstitch wide Snap on the Flat Trim Foot Use default stitch setting. Adjust if needed. Insert the fabric edge into the lower section on the left side of the foot and under the needles. Insert the trim into the upper section on the right side of the foot. Slide the trim toward the back of the foot beyond the needles, leaving a short tail of trim behind the needles. Tip: Use tweezers to slide the fabric and the trim to the correct position under the needles. Lower the needles into the trim and the fabric. Lower the Flat Trim foot As you sew, hold the fabric in your left hand and the trim in your right hand. Tip: If you want a finished fabric edge, press a 1/4"(6mm) hem to the right side of the fabric before inserting the fabric into the Flat Trim Foot. The lace will cover the fabric raw edge when sewn in place
-
Suitable for HUSKYLOCK™ S25 and S21 and AMBER™ AIR s|600 Overlockers Use the Join and Fold Edging Foot to hem the fabric edge and attach it at the same time. Set the machine for Coverstitch. Adjust if needed Use the default stitch settings. Adjust if needed. Snap-on the Join and Fold Edging Foot. Slide the raw edge of the fabric right side up, into the fabric guide. Slide the fabric to the back underneath the presser foot and needles. Insert the lace into the right lace guide and pull a lace tail about 1" (2.5cm) behind the foot. Use tweezers if needed. Lower the presser foot. Hold the fabric in your left hand and lace in your right hand and start to sew. Note: Adjust the screw on the guide to adjust the stitch position if needed.
-
Suitable for HUSKYLOCK™ S25 and S21 and AMBER™ AIR s|600 Overlockers With the Stap and Belt Loop foot, create straps and belt loops easily using a cover stitch. Just put a strip into the foot and the strip is folded automatically and stitched in place. How to use: Set the machine for a Coverstitch wide. Use the default stitch settings. Adjust if needed. Cut a strip of fabric 1" (25mm) wide. Cut the top corner of the strip at a 45 degree angle to form a point. Insert the cut angle into the guide, right side of the fabric facing up. Pull strip through the slot and under the foot. Extend the tail of the strip behind the foot. Use a tweezers to feed the strip into the foot if needed. Snap the Strap and Belt Loop foot into the machine. Slide the strip approximately 2" (5cm) behind the foot. Lower the presser foot. Be sure both raw edges of strip are turned under before stitching. See the first few stitches. Stop and clip the needle threads close to the presser foot and continue sewing. For even feeding, hold the fabric strip slightly below the first guide in the front of the foot. Sew at medium speed. Check the fabric as you sew to ensure proprt feeding. Note: Sew the folded fabric strip without additional fabric underneath to create straps and belt loops or sew the folded strip onto another fabric for decorative effects.
-
Suitable for HUSKYLOCK™ S25 and S21 and AMBER™ AIR s|600 Overlockers With the Clear Coverstitch Foot, you can see your fabric and marked line under the foot as you sew. How to use: Set the machine for a Coverstitch or a Chainstitch. With a water-soluble marker, draw a line on the fabric to mark the stitching line. Snap-on the Clear Coverstitch foot. Use default stitch settings. Adjust if needed. Place the fabric under the presser foot and the needles. Start to sew into the fabric without chaining off first. Use the red centre marking on the foot as a guide as you follow a line drawn on the fabric. The Clear Coverstitch foot will give you a great view of the marked line and of your fabric while sewing.
-
Suitable for S25 and S21 Overlockers The Blindhem Foot is perfect for sewing invisible hems and for applying lace. The hem is sewn, overcast, and trimmed in one step.
-
Microtex or sharp needles (H-M) have a sharp point like Denim needles but are available in smaller sizes. Use for microfiber to topstitch lightweight tightly woven fabrics.
-
Suitable for S25 and S21 Overlockers The Taping Foot is used to apply seam tapes to seams to prevent stretching. It is especially good for stabilizing shoulder seams. With this foot you can reinforce and construct seams in one step.
