-
Designer Diamond Series, Designer Ruby Series, Brilliance Series, Topaz Series, Sapphire Series, Opal Series, Tribute 140C
-
DescriptionExtend the base of your HQ Infinity Longarm machine to provide stability when doing ruler work.
-
Suitable for S15 Overlocker The Blindhem Foot is for sewing cuffs on knit fabrics, and hemming where you want the seam to be invisible.
-
Suitable for S25 and S21 Overlockers The Blindhem Foot is perfect for sewing invisible hems and for applying lace. The hem is sewn, overcast, and trimmed in one step.
-
Suitable for HUSKYLOCK™ S25 and S21 and AMBER™ AIR s|600 Overlockers With the Clear Coverstitch Foot, you can see your fabric and marked line under the foot as you sew. How to use: Set the machine for a Coverstitch or a Chainstitch. With a water-soluble marker, draw a line on the fabric to mark the stitching line. Snap-on the Clear Coverstitch foot. Use default stitch settings. Adjust if needed. Place the fabric under the presser foot and the needles. Start to sew into the fabric without chaining off first. Use the red centre marking on the foot as a guide as you follow a line drawn on the fabric. The Clear Coverstitch foot will give you a great view of the marked line and of your fabric while sewing.
-
Sewing a decorative wavy edge with the Corded Wavy Edge Foot is easy. The curvy, softly ruffled edge is a perfect finish for bridal veils, figure skating costumes, ballet skirts, crafts and more. Note: For best results, use fabric with stretch. For fabric with no stretch, cut on the bias. How to use: Set the machine for a 3-thread rolled edge. Snap-on the Corded Wavy Edge foot. Insert a 0.3mm nylon fishing line (or similar) into the opening in the foot. The fishing line will be covered by the rolled edge. Start to sew slowly. Make sure the fishing line is hidden in the rolled edge as you sew. Tip: * 40 wt. rayon embroidery threads in a contrasting colour in the upper and lower loopers will give a shiny colourful edge.
-
Suitable for HUSKYLOCK™ S25 and S21 and AMBER™ AIR s|600 Overlockers The three-fold 3/8" (10mm) binder will turn a lightweight knitted fabric strip into a binding and attach it to the project edges all in one step. To bind edges with 3/8" (10mm) Coverstitch Binder, cut a 11/8" wide strip of lightweight knit fabric, such as light weight jersey or interlock.
-
Suitable for S25 and S21 Overlockers Increase your visibility while sewing with the Clear Coverstitch Foot. Create beautiful decorative edges and effects with the Flat Trim Foot and the Join and Fold Edging Foot. Straps and belt loops are effortless to create with the Strap and Belt Loop Foot. Add piping, corded tuck and even create wonderful decorative trims with the Piping Foot with a Cording Guide.
-
Denim needles (H-J) have a sharp point to penetrate tightly woven fabrics without deflecting the needle. For canvas, denim and microfibers
-
Suitable for HUSKYLOCK™ S25 and S21 and AMBER™ AIR s|600 Overlockers The Flat Trim Foot makes it easy to add lace and trims to the top of the fabric with a coverstitch to create beautiful decorative edges and effects. How to use: Set the machine for Coverstitch wide Snap on the Flat Trim Foot Use default stitch setting. Adjust if needed. Insert the fabric edge into the lower section on the left side of the foot and under the needles. Insert the trim into the upper section on the right side of the foot. Slide the trim toward the back of the foot beyond the needles, leaving a short tail of trim behind the needles. Tip: Use tweezers to slide the fabric and the trim to the correct position under the needles. Lower the needles into the trim and the fabric. Lower the Flat Trim foot As you sew, hold the fabric in your left hand and the trim in your right hand. Tip: If you want a finished fabric edge, press a 1/4"(6mm) hem to the right side of the fabric before inserting the fabric into the Flat Trim Foot. The lace will cover the fabric raw edge when sewn in place
-
Suitable for HUSKYLOCK™ S25 and S21 and AMBER™ AIR s|600 Overlockers Use the Join and Fold Edging Foot to hem the fabric edge and attach it at the same time. Set the machine for Coverstitch. Adjust if needed Use the default stitch settings. Adjust if needed. Snap-on the Join and Fold Edging Foot. Slide the raw edge of the fabric right side up, into the fabric guide. Slide the fabric to the back underneath the presser foot and needles. Insert the lace into the right lace guide and pull a lace tail about 1" (2.5cm) behind the foot. Use tweezers if needed. Lower the presser foot. Hold the fabric in your left hand and lace in your right hand and start to sew. Note: Adjust the screw on the guide to adjust the stitch position if needed.
Servicing Canberra and the surrounding regions since 1977.We service and repair all makes and models.
